MRE Bus Routing Controllers

Diverging Junction Bus Router (Part Number 020-101)

The diagram above shows the track plan for which this module is intended.

It can be used whenever a branch diverges from the mainline.

The branch is shown turning to the right crossing an opposing track.

The input buses, shown in green, connect to the modules driving the signals 1 and 2.

In this case an MRE 020-336. The output bus shown in red connects to the module

driving signal 3. In this case an MRE 020-332.

There would one further MRE 020-332 module driving signals 4 & 5.

When points 1 & 2 are set straight, Signal 3 will follow signal 1 condition

and signal 4 will follow signal 5 condition.

When point 1 is set to the branch, signal 4 is held at red and signal 3 follows signal 2 condition.

If signal 2 is any colour but red, the route indicator lights.

When point 1 is set straight and point 2 is set to the branch, signal 4 is held at red but signal 3 follows signal 1 condition.